All of our nozzles and fittings are heavy duty, nickel plated metal. These are the finest, most sturdy misting components on the market today. All are push to connect and quick disconnect and are built to satisfy extreme applications. They are non-corrosive and need absolutely no maintenance whatsoever.
You will not find a more durable, longer lasting nozzle assembly or fitting anywhere.
The NOZZLE BODY ADAPTER is used to create a spray nozzle.
One on end, you would place either a tee fitting, and elbow fitting, or a straight fitting, depending on the type of nozzle you are making. On the other end, you would screw in one of our Replacement Spray Nozzle Tips.
This NOZZLE BODY ADAPTER is sold separately and does not include any fittings or nozzle tips.
This REPLACEMENT SPRAY NOZZLE TIP WITH O-RING and bronze filter fits ALL of our nozzle assemblies as well as most nozzle assemblies sold. Simply unscrew your old tip and screw this one in.
Like our nozzle assemblies and fittings, these are heavy duty nickel plated and they provide accurate flow and spray angle.
BRONZE FILTER FOR SPRAY NOZZLE TIPS fits on most all spray nozzle tips.
These filters can be easily changed on your spray nozzle tips and will sometimes be enough to eliminate debris from non-working spray nozzles. They simply unscrew and screw back in.
Many times replacing this filter can save you from replacing the entire tip.
Protect your misting system spray nozzles from clogging with calcium and hard water build-up with this hose end hard water filter. It helps keep your misting system free of dirt, sediment, and scaling that can clog the spray nozzles in your misting system.
This hard water filter connects directly to your garden hose and adds a great layer of protection when filling your misting system from hard water sources. Fits standard hoses 3/4" male by 3/4" female.
It is recommended that the filter be replaced every 6 months.
This is the entire housing connection that contains a pressure gauge, needle valve, return and outgoing tube connection fittings. It screws directly into your system pump.
See the 2nd picture in the product description that shows exactly what this replaces. See area circled in red.
SPRAY NOZZLE TOOL FOR DISASSEMBLING nozzles and fittings from tubing.
Use the U-shaped end to push nozzle and fitting connectors inward to release the "teeth" that holds the nozzle or fitting to the tubing.
One side of the tool is used for 1/4" nozzles and fittings and the other side is for 3/8".