$ 79.99
Ultrashield Fly Spray Insecticide and Repellent is the best selling spot spray available on the market today. sweat resistant, weatherproof formula. Also contains sunscreen and coat conditioners.
Kills and repels all types of insects that pester your horse, including biting and nuisance flies, mosquitoes, ticks, and gnats. It can also be used on ponies, and dogs (over 12 weeks old).
Can also be used as a premise spray on walls of stalls and in horse bedding.
$ 139.99
Replacement 1/2 HP Brass Pump For Insect Misting System.
Brass rotary vane carbonator pump with Viton seals. Internal pre-set relief valves set at 250PSI, which is perfect to run all misting systems.
Clamps and hardware included to attach pump to your misting system motor.
Fits all misting systems made in the last 25 years!
$ 130.00
This is a 500' roll of Black Tubing For Misting Systems. Fits 1/4" fittings and spray nozzles.
This premium grade polyethylene tubing is made of the highest quality resins and is UV resistant.
The black tubing is highly recommended if the tubing runs of your insect misting systems will be in direct sunlight.
$ 0.30
This is 1/4" Tubing For Misting Systems. It fits all 1/4" fittings and spray nozzles.
Please be sure to choose either black or white below tubing below. There is absolutely no difference in the structure of each tubing, other than the color. We do however recommend black tubing if your application is in direct sunlight.
$ 130.00
This is a 500' roll of White Tubing For Misting Systems. Fits 1/4" fittings and spray nozzles.
This premium grade polyethylene tubing is made of the highest quality resins and is UV resistant.
The white tubing is highly recommended for all insect misting systems that have 1/4" fittings and spray nozzles.
$ 29.99
3/8" Intake Tube Assembly For Insect Misting Systems with Suction Filter.
Comes with one of our 100 metal mesh suction filters that attaches to the suction line, inside your reservoir tank.
This intake tube assembly fits all of our systems and will also fit most other misting systems available. If you're not sure about the fit, please call!
$ 12.00
The 4-Way Cross Connector is mainly used in larger system designs where you would have tubing coming into one common area from 4 different locations. It connects 1/4" tubing to and from these locations.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 21.25
The 45 DEGREE ELBOW SPRAY NOZZLE ASSEMBLY is used at the end of tubing runs, so that air bleeder valves are not needed and is the 45 degree version of our regular elbow spray nozzle assembly.
These 45 degree elbow spray nozzle assemblies are quick connect style spray nozzles that are heavy duty nickel plated for extended long life. The quick connect allows for easy assembly and disassembly for installation, maintenance, cleaning or replacement. The nickel plating practically eliminates corrosion.
This 45 degree elbow spray nozzle assembly includes a high pressure nozzle tip with o-ring.
$ 21.25
The 45 DEGREE STRAIGHT SPRAY NOZZLE ASSEMBLY is used in areas where a loop is not needed or is not available and is the 45 degree version of our regular straight nozzle assembly.
These 45 degree straight spray nozzle assemblies are quick connect style spray nozzles that are heavy duty nickel plated for extended long life. The quick connect allows for easy assembly and disassembly for installation, maintenance, cleaning or replacement. The nickel plating practically eliminates corrosion.
This 45 degree straight spray nozzle assembly includes a high pressure nozzle tip with o-ring.
$ 23.50
The 45 DEGREE TEE SPRAY NOZZLE ASSEMBLY is the 45 degree version of our most popular spray nozzle. We recommend installing one 45 degree tee spray nozzle assembly per 12x12 stall and every 10-15 feet on outside installations, such as around pools, patios, and decks. Also works great when connected to fence lines.
These are quick connect style spray nozzles that are heavy duty nickel plated for extended long life. Quick connect allows for easy assembly and disassembly for installation and maintenance, cleaning or replacement. The nickel plating practically eliminates corrosion.
This nozzle assembly includes a high pressure nozzle tip with o-ring.
$ 1,075.00
55 gallon Insect Misting System for barns and homes. Comes with programmable timer, motor, pump, remote control, and reservoir tank.
This insect misting system is completely programmable to automatically spray safe insecticide at timed intervals throughout your coverage area. It has a 7 day battery back-up, 1-100 second misting time knob, empty tank shut-off with lighted alert on timer faceplate, manual "mist now" switch, and a completely programmable 24-hour clock.
PLEASE NOTE: Spray nozzles, tubing, fittings, and insecticide is sold separately. Easily expands to 75 spray nozzles.
$ 1,105.00
55 gallon digital Insect Misting System for barns and homes. Comes with programmable digital timer, motor, pump, remote control, and reservoir tank.
This insect misting system is completely programmable to automatically spray safe insecticide at timed intervals throughout your coverage area. It has a 7 day battery back-up, 1-100 second misting time knob, empty tank shut-off with lighted alert on timer faceplate, manual "mist now" switch, and a completely programmable 24-hour digital clock.
PLEASE NOTE: Spray nozzles, tubing, fittings, and insecticide is sold separately. Easily expands to 75 spray nozzles.
$ 35.00
This is a 55 gallon hard, durable plastic drum lid that comes with pre-drilled holes in order to attach our system mounting plate to. Mounting hardware is included ONLY with the system order, not with the lid order.
This is a lid only. NO DRUM IS INCLUDED.
$ 162.95
This is a black or blue plastic 55 Gallon Drum with Mounting Plate with a white lid and locking ring. It comes with a metal mounting plate with pre-drilled holes. The mounting plate is used to mount your pump, motor and timer of your misting system to the lid of the 55 gallon drum.
PLEASE NOTE! This item is shipped UPS and because of its size, is rather expensive to ship. Shipping charges from UPS are NOT based on weight but rather on size. The cost to ship this item is $135.
$ 963.80
55 gallon Insect Misting System for barns and homes. Comes with programmable timer, motor, pump, and reservoir tank. Digital timer available for an additional $30.
This insect misting system is completely programmable to automatically spray safe insecticide at timed intervals throughout your coverage area. It has a 24 hour battery back-up, 1-100 second misting time knob, empty tank shut-off, manual "mist now" button, and a completely programmable 24-hour clock.
PLEASE NOTE: Spray nozzles, tubing, fittings, and insecticide is sold separately. Easily expands up to 75 spray nozzles.
$ 65.00
120v Analog Clock Replacement For Insect Misting Systems.
This clock will fit ALL Dead Fly Zone misting systems and most systems made in the last 25 years.
IMPORTANT! This is a 120v clock. We no longer carry 24v clocks. Make sure your timer assembly needs a 120v clock before ordering.
$ 485.00
Timer assembly for insect misting systems with remote control, "mist now" capabilities, analog clock, battery back-up, automatic low level shut-off, empty tank light, and float switch.
Remote control makes spraying between programmed settings a breeze!
This timer assembly will fit ALL Dead Fly Zone systems and most systems made in the last 25 years.
$ 3.20
BRONZE FILTER FOR SPRAY NOZZLE TIPS fits on most all spray nozzle tips.
These filters can be easily changed on your spray nozzle tips and will sometimes be enough to eliminate debris from non-working spray nozzles. They simply unscrew and screw back in.
Many times replacing this filter can save you from replacing the entire tip.
$ 6.75
The Coupling simply connects two piece of tubing. These are perfect if a mistake was made when cutting your tubing or if you want to remove a spray nozzle from an area. Essentially, the Coupling is a way to splice two pieces of tubing together.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 45.99
This copper Landscape Riser is 26" high, and 1/2" in diameter. It's slim design makes it ideal for landscaping areas or areas where tubing needs to be underground.
The top is fitted with a 45 degree straight spray nozzle. The bottom is fitted with either a tee fitting or if this riser is the last spray nozzle in a line of them, an elbow nozzle. Please choose correct bottom fitting below.
$ 75.00
Digital Clock Replacement For Insect Misting Systems.
Will fit ALL Dead Fly Zone misting systems and most systems made in the last 25 years.
CLICK HERE FOR DIGITAL CLOCK INSTALLATION AND PROGRAMING MANUAL
https://cdn.shopify.com/s/files/1/1143/1316/files/Digital_Clock_Manual.pdf?v=1619710167
$ 505.00
Timer assembly for insect misting systems with remote control, "mist now" capabilities, digital clock, battery back-up, automatic low level shut-off, empty tank light, and float switch.
Remote control makes spraying between programmed settings a breeze!
This timer assembly will fit ALL Dead Fly Zone systems and most systems made in the last 25 years.
$ 6.75
The Elbow Fitting is used when you connect two sections of tubing coming at right angles. The Elbow Fitting eliminates the possibility of crimping your tubing by bending it around corners.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 18.75
The ELBOW SPRAY NOZZLE ASSEMBLY is used at the end of tubing runs, so that air bleeder valves are not needed.
These elbow spray nozzle assemblies are quick connect style spray nozzles that are heavy duty nickel plated for extended long life. The quick connect allows for easy assembly and disassembly for installation, maintenance, cleaning or replacement. The nickel plating practically eliminates corrosion.
This elbow spray nozzle assembly includes a high pressure nozzle tip with o-ring.
$ 7.00
The ELBOW SPRAY NOZZLE ASSEMBLY is used at the end of tubing runs, so that air bleeder valves are not needed.
These elbow spray nozzle assemblies are quick connect style spray nozzles that are heavy duty nickel plated for extended long life. The quick connect allows for easy assembly and disassembly for installation, maintenance, cleaning or replacement. The nickel plating practically eliminates corrosion.
$ 44.99
This is a replacement Float Switch For Insect Misting Systems. It is black with a 3' cord.
This Float Switch fits our AMS-A and our AMS-D misting systems and most other misting systems that have electric float switches that attaches to the timer with an electric connection.
Please choose the PVC option below.
$ 21.50
Protect your misting system spray nozzles from clogging with calcium and hard water build-up with this hose end hard water filter. It helps keep your misting system free of dirt, sediment, and scaling that can clog the spray nozzles in your misting system.
This hard water filter connects directly to your garden hose and adds a great layer of protection when filling your misting system from hard water sources. Fits standard hoses 3/4" male by 3/4" female.
It is recommended that the filter be replaced every 6 months.
$ 15.60
The Inline Filter removes impurities that may be in your suction tubing BEFORE they reach your facility tubing and nozzles, which helps prevent clogging of your nozzles. These are recommended for systems that use well water or hard water.
Fits 1/4" tubing just like our nozzle assemblies and fittings.
All of our fittings are nickel plated, which provide years of non-tarnishing luster. These are quick fit designed whereas the tubing simply pushes into the fitting until the internal "teeth" grab it and lock it into place. To release the tubing, simply push in the collar surrounding the tubing to release the "teeth" and pull the tubing out.
Holds pressure up to 400 psi.
$ 15.00
The In-Line Shut Off Valve is used to shut down sections of your misting system when that section does not need insect control. This prevents insecticide waste from misting unused areas of your facility.
The section that you would turn off has to be a separate run, not in a loop with the rest of your system.
This In-Line Shut Off Valve only works on 1/4" tubing.
$ 15.00
Inline Check Valves allow flow in one direction and automatically prevents back flow or reverse flow when fluid in the tubing reverses direction.
These are primarily used in system designs where there is a large number of spray nozzles and large lengths of tubing. They are connected to your tubing to ensure that spray nozzles furthest from the pump receive adequate pressure at the same time as those spray nozzles closest to the pump, when the system activates.
$ 179.99
Fills a 55 gallon reservoir once and a 30 gallon reservoir twice.
This refill comes in two containers. One is a half gallon of Vector Ban insecticide and the other is a quart of PBO-8, which is a highly effective insecticide synergist. Both containers are poured into your reservoir tank at the same time and then filled with 50 gallons of water.
This insect misting system refill protects your barn and horses from every conceivable flying and crawling insect that has the misfortune of entering your barn. It is completely safe for all animals, as well as people. DO NOT use where fish are present!
$ 79.99
This insect misting system refill fills a 55 gallon reservoir once and a 30 gallon reservoir twice.
Comes with 1/2 gallon of Vector Ban PLUS. it is poured into your reservoir tank and then filled with 50 gallons of water.
Protects your yard from every conceivable flying and crawling insect including mosquitos, flies, gnats, fleas, roaches, spiders, etc. It is completely safe for all animals, as well as people. DO NOT use where fish are present!
If you are using a misting system in a barn and your primary target insect is flies, THIS IS NOT THE PRODUCT FOR YOU! You need to use our insecticide refill for Equine.
$ 843.80
Insect Misting System for barns and homes. Comes with a choice of 4 programmable timers.
THIS SYSTEM DOES NOT COME WITH A RESERVOIR TANK OR LID!
It does come with a float switch and a intake tube assembly with suction filter. There is no need to order those separately.
This insect misting system is completely programmable to automatically spray safe insecticide at timed intervals throughout your coverage area. It has a 7 day battery back-up, 1-100 second misting time knob, empty tank shut-off with lighted alert on timer faceplate, manual "mist now" switch, and a choice of 4 completely programmable 24-hour clocks.
All components of this insect misting system come mounted to a steel plate that you will need to mount to your own lid and drum. All mounting hardware is included.
PLEASE NOTE: Spray nozzles, tubing, fittings, and insecticide is sold separately. Easily expands to 75 spray nozzles.
CHOOSE TIMER OPTION BELOW!
$ 22.00
This is a replacement Liquid Filled Pressure Gauge For Automatic Insect Spray Systems. This gauge goes up to 300psi, and will fit most all insect misting systems made.
If you're not sure if this will fit your system, please give us a call! We'd be happy to verify if it will fit.
$ 23.35
Martin's 10% Permethrin Insect Misting System Insecticide is for use on cattle, lactating dairy cattle, horses, swine, poultry, pets and for use in Dead Fly Zone's Automatic Insect Misting Systems.
Mix 2 quarts into 50 gallons of water or 1 quart into 30 gallons, depending on the size of your misting system reservoir tank.
$ 21.99
Replacement Micro Switch for use in our AMS-S1M system.
This switch is attached to fishing line that connects to float ball inside the reservoir tank. When the tank level is too low and the float ball is pulled straight down. The Micro Switch is also pulled to the down position, which prevents the system from activating until the reservoir tank is re-filled.
Temporarily Out Of Stock
This Dead Fly Zone item is a combination Mini Pump and Motor that is used specifically in mini insect misting systems with 20 or less spray nozzles. This is a pump and motor in one unit and works up to 250PSI.
DO NOT order this item if you have over 20 spray nozzles.
$ 195.00
1/2 hp motor for insect misting systems that will fit most misting systems made in the last 25 years, including ALL of Dead Fly Zone's misting systems.
If you are not sure if this will fit your system, please contact us and we'll let you know!
$ 55.00
Attaches to barrel lid. Timer assembly, motor, and pump attach to mounting plate.
$ 19.00
This is a replacement Needle Valve that works with your PSI Gauge to control and adjust PSI output.
$ 184.99
We are proud to add TROIKA to our arsenal of misting system insecticide refills. Troika combines the active ingredients of pyrethrum, permethrin, and synergist piperonyl butoxide (PBO) for enhanced control when your barn needs a serious jolt of coverage for tough insect control.
Troika Misting Concentrate is a water-based insecticide with three highly effective active ingredients to provide quick results and long-lasting residual effects. This concentrated formula is specifically designed for problem areas that need to get ahead of their fly and insect problems quickly.
This refill fills a 55 gallon reservoir once and a 30 gallon reservoir twice.
$ 5.50
The NOZZLE BODY ADAPTER is used to create a spray nozzle.
One on end, you would place either a tee fitting, and elbow fitting, or a straight fitting, depending on the type of nozzle you are making. On the other end, you would screw in one of our Replacement Spray Nozzle Tips.
This NOZZLE BODY ADAPTER is sold separately and does not include any fittings or nozzle tips.
$ 79.99
This is the entire housing connection that contains a pressure gauge, needle valve, return and outgoing tube connection fittings. It screws directly into your system pump.
See the 2nd picture in the product description that shows exactly what this replaces. See area circled in red.
Under No Circumstances Will We EVER Share Your Email Address
© 2023 Dead Fly Zone.
